Each master, having some kind of power tool in his home arsenal, sooner or later thinks about expanding its capabilities. I want to save money and get some kind of function without purchasing another “device”.
I bring to your attention one of these nozzles for a drill.
To make a nozzle, we need:
1. Bolt and nut M10 60 - 70mm long.
2. Two bushing washers.
3. Whetstone.
In this design, the most difficult part is the bushing washers. In my design, they were made of aluminum. You may find it easier to find steel ones. They had to be turned on a lathe. The outer diameter of the sleeve is 20mm (according to the stone used).
The inner diameter of the sleeve is 10.4 mm. The outer diameter of the washer is 40mm.
If there is no lathe, you can search separately for a washer, separately for a sleeve.
We collect the nozzle:
Nozzle assembly:
We fix the nozzle in the drill chuck and sharpen drills, knives, chisels.
Washing machine drain pump not working? Step by step instructions on how to fix it. Might not have to buy...
A simple and reliable do-it-yourself car battery charger. Photo and Video Minimum details…
How to remove a boiled, soured brake drum of Slavuta or Tavria
16 homemade products that were familiar to every child in the USSR. Toys of children of the USSR, which were made from ...
On self-repair, I saved about 6,000 rubles. Demonstrate how to quickly repair the lock of the washing machine ...
Why do you need to know the magnitude of the current kz? What is the use of this knowledge? Turns out to be very important...
This website uses cookies.