How to get a broken key out of a lock. Two ways.

That's because what an opportunity happened to me yesterday!

advertisement

He opened the lock in his workshop, but broke the key. The fragment remained in the larva, and in the hands of only the head of the key. I have a spare key ... But the key fragment must be removed from the lock.

In general, the procedure for extracting the fragment is not so complicated. Dealt with it quickly.

However, I had to use two methods.

For a long time I wanted to change this lock, so the reason happened ...

On the dismantled lock, now I’ll show everything. There is a short video at the end of the article.

So, I drive the chip back into the larva. Conditions are close to reality. Only the head of the key remains in the hands. However, we don't need it anymore...

Before starting any manipulation, make sure that the key hole is in a position where the key can be removed. In my case, it should be vertical.

Method one. How to remove a key chip

When the lock was on the door - this method did not help me, I had to use the second method. But when I did all this for the article, it turned out amazingly.

In the simplest case, all you need is a needle. Depending on the design of your lock, a paper clip may also work. But the needle will be more effective.

The tip of the needle is driven into the space between the fragment of the key and the body of the larva.

As soon as you feel that the tip has caught on a chip, move the free end of the needle (eye) forward. It's like pulling a nail out with a nail puller...

As soon as the chip "crawled" out of the larva a couple of millimeters, you can use tweezers or pliers to continue extracting the rest of the key.

On "everything about everything" it took me less than a minute. The fragment has been removed.

But if the chip stubbornly refuses to come out, consider the second method (hereinafter).

The second way. How to get a broken key out of a lock.

To do this, you will need a drill and a thin drill bit. I had a millimeter drill.

Install the drill in the space between the debris and the body of the larva at an angle of 45 degrees.

Now your task is to drill into the key fragment, despite the damage that the drill will do to the outer part of the larva.

The main thing is to drill a chip.

Now insert the needle into the hole that the drill has made. And just like in the first method - pull out a piece of the key.

Further, the chip can be pulled out with your fingers.

Video version of the article:

advertisement
admin

Recent Posts

Washing machine drain pump repair and maintenance

Washing machine drain pump not working? Step by step instructions on how to fix it. Might not have to buy...

11 months ago

Simple car battery charger

A simple and reliable do-it-yourself car battery charger. Photo and Video Minimum details…

12 months ago

How to remove a stuck brake drum

How to remove a boiled, soured brake drum of Slavuta or Tavria

1 year ago

Homemade toys for children from the USSR

16 homemade products that were familiar to every child in the USSR. Toys of children of the USSR, which were made from ...

2 years ago

Repair of the lock and control board of the INDESIT washing machine or how I saved 6000 rubles

On self-repair, I saved about 6,000 rubles. Demonstrate how to quickly repair the lock of the washing machine ...

2 years ago

Why do you need to know the magnitude of the current kz

Why do you need to know the magnitude of the current kz? What is the use of this knowledge? Turns out to be very important...

2 years ago

This website uses cookies.

For any suggestions on the site: nsk-osb@cp9.ru